Storage Conditions; Adverse Reactions; Step-By-Step Instructions; Hygiene - DENTSPLY MULTI Enhance Instrucciones De Uso

2.3 Storage conditions

Inadequate storage conditions may shorten the shelf life and may lead to malfunc-
tion of the product.
. Dry storage is recommended.
. Store at temperatures between 0 and 4 °C.
. Store the Enhance Multi Finishers and Polishers protected against contaminants
and against chemicals, acids, heat, mechanical stress and extreme temperature
variations.
4. Do not use after expiry date.

2.4 Adverse reactions

• Product misuse may cause failure resulting in respiratory, digestive, eye, skin, or
mucosa injury. (See . Warnings and . Precautions)
• Product misuse may cause excessive heat. (See . Warnings)
3

Step-by-step instructions

. Place restoration or composite veneer as per standard techniques. Complete
gross reduction of excess and general outline form of the restoration using finish-
ing burs.
. Insert an Enhance Multi Finisher (dark grey) into a conventional speed contra-
angled hand piece and continue finishing. Use with water. The aggressiveness of
the Enhance Multi Finishers is controlled by the pressure applied to the surface of
the composite. Use moderate to light, intermittent pressure in a buffing motion.
Frequently raise instrument from surface contact.
. Once final contours are achieved, proceed to polish. Insert an Enhance Multi
Polisher (light grey) and continue polish for final high surface luster.
Note: Enhance Multi Finishing and Polishing Points are ideal for posterior occlusal
and concave lingual surfaces. Enhance Multi Finishing and Polishing Cups are well
suited to cervical and proximal line angle areas.
4

Hygiene

Sterilize prior to first use.
4.1 Cleaning
Remove surface debris by rinsing with water and brushing.
4.2 Disinfection
Disinfect with an aldehyde-free hospital-level, tuberculocidal disinfectant solution
according to national/local regulations. The disinfectant manufacturer's directions
should be followed properly for optimum results. Remove residual disinfectant with
water and dry.
4.3 Sterilization
Enhance Multi Finishers and Polishers are autoclavable.
Steam sterilization for 0 minutes at 4 °C (7 °F)/. bar is recommended.
4