Menu Explanations - DENTSPLY Multimat Easy Manual De Instrucciones

5 Controls

‹ Menu explanations

The first message of the start-up sequence after the unit is
turned on.
Degudent KBO
V1.00 ...booting...
After turning on, the unit performs a self-test to check all
systems and input/output connectors.
Selftest
The values discussed in "Firing parameters" are shown in
the main menu, which is always displayed when the unit
is operating.
Main menu
(last program)
Here you can invoke additional submenus for system
configuration (see "Moving through the menus/Menu
overview")
Configuration
Here you can enter a calibration offset determined by a
calibration using a silver wire test (see "Calibration").
Calibration
Here you can delete programs you have saved.
Delete program
50
MultimatEasy
Here you can load programs from internal memory or from
a USB memory stick.
Load fixed programs
Here you can start a software update, provided a USB
memory stick with the new software version has been
inserted.
Update
Here you can start a data backup.
Data backup
Here you can change the language in which the menus
are displayed.
Language
[German, English]
Here you can pre-set the base temperature (default:
400 °C); see the diagram in "Firing parameters".
Basic temperature
[°C/°F]
Here you can determine whether the muffle will heat in
standby mode (see "Entering standby mode").
Standby temperature
[°C/°F]