Fagor PS-20/140 M Manual De Instrucciones página 22

To access the statistics menu, with the machine stopped, press the maintenance menu access
button (7) to display "ENTER CODE - 0000" on the screen. Enter code "1234" using the
"temperature increase" buttons (4) to select the 1st digit (between 0 and 9) and the "validation
button" (6) to validate and go to the
- TOTAL TIME: corresponding to the time, in hours, during which the machine has been
powered on.
- RUN TIME: corresponding to the time, in hours, that the machine has been running.
- HEAT TIME : corresponding to the time, in hours, in which the machine has been in
the heating phase.
- PREVENTIVE HOURS: corresponding to the time, in hours, from the moment
preventive maintenance has been programmed in the maintenance menu (see section
3.4).
- RESET COUNTER M: Used to reset the "PREVENTIVE HOURS" statistic by selecting
"YES" using buttons 4 and 5, validated by pressing 6 and thus remove the preventive
maintenance message ("PREV MAINTENANCE") which appears at each start-up when
the number of hours defined in the maintenance menu (see section 3.4) is reached.
digit and so on.
2nd
16