Fagor PS-20/140 M Manual De Instrucciones página 14

Do not tip or drop the machine when unloading for example.
Note: if slinging is used (not planned and strongly discouraged) handling will be the sole
liability of the handler (risk of warping the machine).
DIMENSIONS in mm
(Width x Depth x Height)
all included
PS-20/140 M
1878x666x1110
PS-20/160 M
2128x666x1110
PS-20/200 M
2478x666x1110
2.2.2. Premise characteristics
The machine must be installed in very well ventilated premises with correct lighting and
•
a temperature of between + 10°C and + 40°C (limit temperature for the drive motor
variable frequency drive).
To achieve best machine performances, make sure that fresh air enters from outside
•
the room, as close to the machine as possible.
The fresh air inlet cross-section must be at least 4 times the outlet pipe cross-section.
Depending on the model, there may be two outlet evacuation pipes.
Note: the fresh air inlet cross section is the cross section through which the air can
move without resistance due to the grate installed on the inlet. The fact that the grate bars
occupy a large part of the grid cross section should be taken into account.
Sufficient space must be left around the machine to allow proper operation:
10 cm minimum at the back.

60 to 80 cm on each side for servicing and maintenance.

Sufficient space must be left at the front for operators to be able to work properly

and safely.
Minimum floor strength is required to install this type of machine (see table below).
Machine Type
Weight (KG)
Floor surface area (m²)
Static stress (daN/m²)
2.2.3. Installation
Before removing the transport elements (pallet and beams), bring the machine as close as
possible to its final installation.
The drier-ironer is delivered on a pallet which is fixed to the 4 corners of the machine by 4
screws. To access and remove the screws, the side panels must be removed.
without
with packaging
packaging
2130x770x1400
2340x770x1400
2780x770x1400
PS-20/140 M PS-20/160 M
180
1.25
692
WEIGHT (KG)
with packaging
180 220
203 240
237 275
PS-20/200 M
203 237
1.4 1.65
780 911
Volume
(m3)
Pack.
2.3
2.52
3
8