Idiomas disponibles
Idiomas disponibles
Lite Flush Electric Toilets — Models 58500-Series
FEATURES
• Space saving stylish design
• Compact size, rotatable seat
• Virtually silent operation
• Choice of leaving bowl wet or dry after use
• Non-clogging large bore flush pump macerates waste
• Uses less than 1.0 amp/hour per day
• Raw water only
MODEL RANGE
Description
Foot switch variant
24 lbs (11 kg)
Control panel variant
24 lbs (11 kg)
Foot-switch Controller
The Lite Flush Toilet offers a single touch fully automatic foot-
switch operation.
• The first press of the foot-switch activates the rinse pump and
adds approximately 0.6 quarts (0.6 liters) of water to the bowl.
• The second press of the foot-switch activates the rinse pump
adding a further 0.6 quarts (0.6 liters) of water to the bowl and
then operates the flush pump, discharging the contents and
leaving the bowl dry.
This is the complete 2 stage flush cycle. You may decide to leave
the bowl dry or, by pressing the foot-switch once more, leave the
bowl wet, ready for the next user.
Note: The correct use of the toilet is to:
CAUTION: Ensure fill button (Touch Pad) or Foot-
switch is pressed to fill bowl with water before use.
Failure to follow these steps may cause a blockage.
1. Press the foot-switch and add water to the bowl.
2. Use the toilet.
3. Press the foot-switch to add water and
4. Then discharge.
Touch pad controller
The Lite Flush Toilet features a 'one
touch' control pad offering two options
'fill' and 'flush' .
• The user needs to press the 'fill'
button first to activate the rinse
pump and adds approximately 0.6 quarts (0.6 liters) of water
before use.
Part No.
Lite Flush
58500-0012
12V
Lite Flush
58500-0024
24V
Lite Flush
58500-1012
12V
Lite Flush
58500-1024
24V
• The 'flush' press activates the rinse pump adding 0.6 quarts
The fill and flush functions operate in a flush cycle sequentially.
You need to press the fill button before the flush function oper-
ates. You may decide to leave the bowl dry or, by pressing the fill
button once more, leave the bowl wet, ready for the next user.
Note: The correct use of the toilet is to:
1. Press the 'fill' button to add water to the bowl
2. Use the toilet.
3. Press the 'flush' button to add water and then discharge.
4. Before you use your Lite Flush Toilet please refer to the operat-
APPLICATIONS
You may install Jabsco Lite Flush electrically operated marine
toilet in both power and sailing craft, either above or below the
waterline, for use on sea, river, lake or canal.
2
Fuse/
Breaker
25 amp
15 amp
25 amp
15 amp
(0.6 liters) of water to the bowl and then operates the flush
pump, discharging the contents and leaving the bowl dry.
CAUTION: Ensure fill button (Touch Pad) or Foot-
switch is pressed to fill bowl with water before use.
Failure to follow these steps may cause a blockage.
ing guide on pages 4 to 6 for detailed usage instructions.
WARNING: Do not connect the Jabsco Lite Flush to
pressurized fresh water systems.
CAUTION: JABSCO electric toilets are designed
specifically for marine use.
