Silvercrest SSMR 600 A1 Guía Rápida página 23

• Ensure that the power cord cannot be damaged by sharp edges
or hot surfaces. The power cord must not get jammed or squashed.
Always remove the power cord from the power socket by the plug;
never pull on the cable itself. Always lay the power cord in such a
way that nobody can stand or trip on it. There is a risk of injury!
• The device must always be disconnected from the mains network if
left unattended, in the event of malfunctions and prior to assembly
and disassembly or cleaning. There is a risk of electric shock!
Under no circumstances may the motor block (4) be immersed
in water, and no liquids must ingress into the housing of the
motor block (4).
• Should liquids ingress into the housing of the motor block (4),
immediately remove the plug from the power socket and contact
the service department. There is a risk of electric shock!
• Never touch the motor block (4), the power cord and the plug
with wet hands. There is a risk of electric shock!
• Disconnect the hand-held blender from the mains network as soon
as it has been used. The device is only de-energised once the plug
has been removed. There is a risk of electric shock!
DANGER of fire
Following the maximum period of use of up to one minute, let the
hand-held blender cool down for at least two minutes and only then
continue with the process previously started. There is a risk of fire.
SSMR 600 A1
English - 21