Idiomas disponibles
Idiomas disponibles
ENGLISH
INSTRUCTIONS AND WARNING FOR REPLACING PARTS
NOTE: Read the following section of
the "user instruction manual" carefully be-
fore replacing any part:
– Hazards and safety provisions during instal-
lation and commissioning, adjustments and
part replacement.
WARNING: Before carrying out any
replacement procedure, activate all the sa-
fety devices provided and decide whether
staff at work and those in the vicinity should
be informed.
In particular, turn off the gas supply tap, cut off
the electricity supply using the master switch
and prevent access to all devices that might
cause unexpected health and safety hazards if
turned on.
REPLACING THE TOP BURNER NOZZLE (Ø 80 - 4 KW)
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
1)
Remove the grid (A).
2)
Extract the burner (B).
3)
Unscrew the nozzle (C) and
4)
replace it with the one suit-
able for the type of gas in
use (see table at back of
manual).
Replace the burner and the
5)
grid.
18
REPLACING PARTS
A
If worn parts have to be replaced, use original
spare parts only.
The manufacturer declines all responsibly for
injury or damage to components due to the
use of non original parts, or extraordinary work
on the appliance which may modify the safety
requirements without the manufacturer's au-
thorisation.
When ordering components, follow the instruc-
tions provided in the parts catalogue.
B
REPLACING PARTS
8
C
3301360_inst_GB_rev.2
