Idiomas disponibles
Idiomas disponibles
3.
Note the direction of rotation of the motor and saw
blade.
4.
Do not use any insertion tools with cracks. Sort out
cracked insertion tools. Repairs are not permitted.
5.
Clean grease, oil and water off of the clamping
surfaces.
6.
Do not use any loose reducing rings or bushes to
reduce holes on circular saw blades.
7.
Make sure that fixed reducer rings for securing the
insertion tool have the same diameter and have at
least 1/3 of the cutting diameter.
8.
Make sure that fixed reducer rings are parallel to
each other.
9.
Handle the tools used with care. It is best to store
these in their original packaging or special con-
tainers. Always wear protective gloves to improve
your grip and further reduce the risk of injury.
10. Before using any of the tools, ensure that all pro-
tective devices are correctly attached.
11. Before use, ensure that all of the tools used by you
full the technical requirements of this power tool
and are properly attached.
12. The saw blade supplied should only be used for
sawing wood and never for working metal.
13. Use the saw blade intended for the material to be
processed.
14. Use only a saw blade with a diameter that matches
the specifications on the saw.
15. Use only saw blades that are marked with an equal
or higher rotational speed than that marked on the
power tool.
16. Use only saw blades recommended by the manu-
facturer which conform to EN 847-1, if intended for
cutting wood or similar materials.
17. Wear suitable personal protective equipment,
such as:
– hearing protection;
– protective gloves when handling saw blades.
18. Use only saw blades recommended by the man-
ufacturer which conform to EN 847-1. Warning!
When changing the saw blade, make sure that the
cutting width is not smaller and the thickness of
the saw blade is not greater than the thickness of
the splitter.
19. When sawing wood and plastics, avoid overheat-
ing the saw teeth. Reduce the feed speed to avoid
the plastic melting.
34 | GB
Residual Risks
This power tool has been constructed in accord-
ance with the latest technology and the generally
recognised safety regulations. Nevertheless, it is
possible that individual residual risks may occur
during operation.
• Electrical hazard if improper electrical connection
cables are used.
• In addition, concealed residual risks may be present
in spite of all the precautions that have been taken.
• Residual risks can be minimised by observing the
„Safety instructions" and „Use in accordance with
the designated purpose", as well as the operating
instructions.
• Do not put any unnecessary stresses on the ma-
chine: excessive pressure during sawing will quickly
damage the saw blade. This may result in a reduc-
tion in the performance of the machine, as well as a
reduction in the cutting accuracy.
• Avoid switching the machine on by accident: when
inserting the plug into the socket, the power button
must not be pressed.
• Use the tool which is recommended in this manu-
al. This will ensure the optimal performance of your
saw.
• Keep your hands away from the working area when
the machine is in operation.
• Before you carry out any adjustments or servicing
work, turn the device off and remove the mains plug.
6. Technical data
AC motor .......................................... 220-240 V~ 50 Hz
Power consumption ............................. 1200 Watt (S1*)
....................................................... 1500 Watt (S6 25%)
Idle speed n
Hard metal saw blade ................ø 210 x ø 30 x 2,6 mm
Number of teeth ......................................................... 24
Riving knife thickness ........................................2.0 mm
Min. size of workpiece W x L x H ......... 10 x 50 x 1 mm
Table size ................................................485 x 445 mm
Table width extension ............................. 485 x 515 mm
Table size max. .......................................485 x 630 mm
Cutting height max. 45° ......................................45 mm
Cutting height max. 90° ......................................48 mm
Tilting saw blade ............................................ 0-45° left
Suction connection ..........................................ø 35 mm
Weight ...................................................... approx. 14 kg
Machine size (with extension)
W x L x H .......................................485 x 630 x 440 mm
www.scheppach.com
.................................................4800 min
0
-1
