Trumpf TruTool N 350 Manual Del Usuario página 20

EN
4 Consumables and
accessories
4.1 Tool selection
For notes about the selection of the correct
tool, order specifications for wearing parts
and consumables, and accessories and
spare parts lists, see:
www.trumpf.com
N 350
(3A1)
N 500
(3A1)
N 700
(2A1)
N 1000
(3B1)
5 Troubleshooting
Problem
Electric tool is slug-
gish.
Power tool vibrates a
lot.
Die holder is broken.
20
Cause
Punch is dull or dam-
aged.
Punch guide is worn
out.
Wearing plate is worn
out.
Die is dull.
Immersion depth is
too small/too large.
Immersion depth is
too small/too large.
Service life of die
holder has expired.
Translation of the original operator's manual
Remedy
Regrinding the punch [} 19].
u
Changing punches
u
Changing punch guide
u
u Changing wearing plate
Checking/replacing wearing parts
u
[} 320].
K
Immersion depth [} 19].
u
Setting the immersion depth
u
u Immersion depth [} 19].
Setting the immersion depth
u
Changing punches
u
Replace the die holder.
u
Checking/replacing wearing parts
u
[} 320].
K
[} 316].
I
[} 321].
L
[} 321].
M
[} 316].
E
[} 316].
E
[} 316].
I
[} 318]
J