Idiomas disponibles
Idiomas disponibles
EL
RS
AS
I
A
RE
ST
EE ETT
RET
TE
The Multi-Timbral Mede
When the Multi-Timbral mode is ON, MIDI data arriving
on several channels can be received. This allows you to
simultaneously play several of the piano's internal sounds.
* When the Muiti-Timbral Mode is OFF
Data that arrives on the specified Receive channel (see
page 11) is received and used to play the currently
selected Voice.
* When the Muiti-Timbral Mode is ON
Of any MIDI data that arrives, that which arrives on
channels 1, 11, 12, 13, 14 and 15 is received. Data on
all other channels is ignored.
The Voice that is used to piay the notes will be deter-
mined by the Program Change message that is received
on the relevant channel. The corresponcenc
Program Change Numbers and Voices
13.
While holding down the FUNCTION button, press the
PIPEORGAN button to turn the Multi-Timbral Mode ON
or OFF,
With the indicator Jit, it is ON.
PIPE
ORGAN
How Various Types of Messages Function While the
Multi-Timbral Mode is ON
« Pedal Messages
Damper, sostenuto and soft pedal messages function
independently for any of these channels: 1, 11, 12, 13,
14 0r 15.
* Volume Messages
Volume messages control the volume, and function
independently for any of these channels: 1, 11, 12, 13,
14 or 15. Such messages, however, have no effect on
what is played on this instrument's keyboard.
The actual volume obtained is determined by both the
value of the Volume message, and the position of the
Volume knob on this instrument. When a Volume
message calls for the maximum value, the actual
volume produced will directly reflect the position of the
Volume knob.
Chorus On/Off Messages
Chorus On/Off messages affect independently for each
channel 1, 11, 12, 13, 14 or 15.
Reverb On/Off Messages
Reverb On/Off messages affect all Voices equally,
regardless of whether they are received on channel 1,
41, 12,13,
14 0r 15.
*
When the Multi-Timbral Mode is "On," the unit will
always be at "Omni OFF."
Selecting the Transmission/Reception
Mode
Three Transmission/Reception Modes have been provided
to allow you to select the mode which best matches your
needs.
* Note and Pedal messages are received/transmitted in
every mode.
Hold down the FUNCTION butten while you press the
E.PIANO button to set the Transmit/Receive mode. When
the E.PIANO button's indicator is dark, you are in Mode
1. When the E.PIANO button's indicator is blinking, you
are in Mode 2. When the E.PIANO© button's indicator is lit,
vou are in Mode 3.
EPIANO
C=2] Mode 1
[aeet}
Made 2
Funcnion
j
C=
Mode 3
While holding
ty)
* When power is turned on, the unit will always be at
the Mode 1 setting.
Mode
b
too
i
MIDI Messages
TX RX TX
RX TX
RX
Note Messages
Yes Yes Yes Yes Yes Yes
Program Change Messages
Yes Yes Yes No Yes* Yes
Control Change Messages
Volume
{7}
No Yes No Yes No Yes
Damper
(64)
Yes Yes Yes Yes Yes Yes
Sostenuto
(66)
Yes Yes Yes Yes Yes Yes
Soft
(67)
Yes Yes Yes Yes Yes Yes
Chorus On/Off (93)
Reverb On/Off (91)
(RPN)
Roland System Exciusive Messages
Multi-Timbral Mode
No No No No Yes Yes
No No No No Yes Yes
No No No No Yes Yes.
Master Tune
No Yes No Yes Yes Yes
Chorus Depth
No Yes No Yes Yes Yes
Reverb Depth
No Yes No Yes Yes Yes
Brilliance
No Yes No Yes Yes Yes
* In Mode 3, the appropriate Program Change message
will be transmitted whenever you press a Voice button.
(See the following page.)
