Idiomas disponibles
Idiomas disponibles
Double insulation
electric power tools which eliminates the need for
the three wire grounded power cord and grounded
power supply system. It is a recognized and ap-
proved system by Underwriter's Laboratories, CSA
and Federal OSHA authorities.
IMPORTANT: Servicing of a tool with double insu-
lation requires care and knowledge of the system
and should be performed only by a qualified ser-
vice technician.
WHEN SERVICING, USE ONLY IDENTICAL RE-
PLACEMENT PARTS.
Polarized Plugs
To reduce the risk of electrical shock, your tool is
equipped with a polarized plug (one blade is wider
than the other), this plug will fit in a polarized out-
let only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper
outlet. To reduce the risk of electrical shock, do
not change the plug in any way.
Extension Cords
Replace damaged cords immediately. Use of dam-
aged cords can shock, burn or electrocute.
If an extension cord is necessary, a cord with ade-
quate size conductors should be used to prevent ex-
cessive voltage drop, loss of power or overheating.
The table shows the correct size to use, depending
on cord length and nameplate amperage rating of
tool. If in doubt, use the next heavier gauge. Always
use U.L. and CSA listed extension cords.
1609B07947_GTS15-10_Table_Saw_OSI_20230420.indd 10
1609B07947_GTS15-10_Table_Saw_OSI_20230420.indd 10
Double Insulated Tools
is a design concept used in
RECOMMENDED SIZES OF
EXTENSION CORDS 120 VOLT
ALTERNATING CURRENT TOOLS
Cord Size in A.W.G.
Tool's
Cord Length in Feet
Ampere
Rating
25
50
3-6
18
16
6-8
18
16
8-10
18
16
10-12
16
16
12-16
14
12
NOTE: The smaller the gauge number, the higher
the cord capacity.
-10-
Wire Sizes in mm
Cord Length in Meters
100
150
15
30
60
16
14
0.75 0.75
1.5
14
12
0.75
1.0
2.5
14
12
0.75
1.0
2.5
14
12
1.0
2.5
4.0
–
–
–
–
–
4/20/2023 11:23:02 AM
4/20/2023 11:23:02 AM
2
120
2.5
4.0
4.0
–
–
