Idiomas disponibles
Idiomas disponibles
.../ K VERSION –.../KA VERSION (with gearbox and hydraulic pump support)
ANTICLOCK
WISE
Versions... /K and ... /KA have been designed so that they can be used to actuate the hydraulic accessories (gate valves, draft
tube, support base etc.) on the tank car because in many cases the hydraulic pump on the tractor does not have sufficient oil flow
rate for all the movements. With this application all the work may be carried out from the tractor cabin by operating only one
distributor
CLOCK
WISE
All the versions of the STAR series of Rotary blades vacuum pump can be supplied with back tank in cast iron (versions /MV, /MAV, /PV,
/DV, /HV, /KV /KAV) or with extractable plastic side tank (versions /MF, /MAF, /PF, /DF, /HF, /KF, /KAF).
1.1 IDENTIFICATION LABEL
Every rotary blades pump is supplied with an identification label stating:
- rotary blades pump model
- serial number
- production year
- max relative pressure
- max vacuum
- max absorbed power
- max r.p.m.
- max rate of flow
- CE mark
- weight of pump
Every identification plate is protected by a
special sky-blue colour film, to remove after
painting.
This film has been introduced to guarantee the
tracing of the pump for warranty purposes.
.../ G VERSION –.../GA VERSION (application for GARDA)
for use and maintenance serie MEC, STAR
•
... / K the power take-off is actuated through a cardan shaft
at 540 rpm and is designed to actuate an hydraulic pump of
group 2 or group 3. This version can be recognised by the
hydraulic pump support and by the identification plate.
•
... / KA the power take-off is actuated through a cardan shaft
at 1000 rpm and is designed to actuate an hydraulic pump of
group 2 or group 3. This version can be recognised by the
hydraulic pump support, by the identification plate and by the
punching placed on the upper part of the gearbox.
•
... / G version of Rotary blades vacuum pump that is applied on
the GARDA group; it cannot be used on its own. This version
can be recognised by the external pinion placed at the front
of the Rotary blades vacuum pump and by the identification
plate.
•
... / GA version of Rotary blades vacuum pump that is applied
on the GARDA group at 1000 rpm; it cannot be used on its
own. This version can be recognised by the external pinion
placed at the front of the Rotary blades vacuum pump and by
the identification plate.
IDENTIFICATION LABEL WITH PROTECTIVE FILM
instruction manual
FOR PAINTING
pag. 35
