Idiomas disponibles
Idiomas disponibles
Connecting
Characteristic electrical data of the control system
Connection voltage
Frequency
Total output
Electrical fuse
No. of phases
Overview of external connections
Pictogram on the calibration and adjustment facility
100 to 240 V AC
50 to 60 Hz
250 W
2 x 6.3 A glass tube fuse T6.3A/250 V (at the IEC
power connector socket)
1-phase
Connection
Manual operating terminal /PCA2 connection
The manual operating terminal can be connected
here.
If the manual operating terminal is not connected,
the bridge connector must be connected.
If the manual operating terminal or the bridge
connector are not connected, an emergency stop
error message is output
PC connection
Connect the PC here. Use only the 3.5 mm jack
plug cable and the USB adapter from STAHLWILLE
for this purpose.
Calibration object connection
Connect the electronic calibration objects of the
STAHLWILLE model series 712, 713 and 730D
torque wrenches as well as the model series 772x
transducers here. Alternatively, interface adapter
7761 can be connected for torque wrenches 714
and 701.
Connecting
21
