Idiomas disponibles
Idiomas disponibles
Installing extension 7791-1
Insert the extension with the two centring pins into
the intended mountings on the calibration and
adjustment facility.
Tighten the two bolts (4) on the left- and right-
hand sides of the extension hand-tight.
The illustration shows the left-hand side.
20
To secure the extension to the work surface, the
mounting brackets (5) first have to be adjusted.
Release the bolts for adjusting the mounting
brackets.
Lower the mounting brackets onto the work
surface.
Tighten the bolts for adjusting the mounting
brackets hand-tight.
Secure the extension to the work surface using
the bolts and the mounting brackets.
