Korg MS-20M Manual De Usuario página 10

Assembling the bottom panel section and the top panel section
1. Attaching the rubber feet to the bottom panel
Install the rubber feet in the four locations on the bottom panel. Insert the rubber feet into the installation holes in the bottom
panel, and then insert the tip of the screwdriver into the center of the rubber feet and secure them.
Caution: Be careful to avoid injuries from the tip of the screwdriver.
2. Attaching the bottom panel with the included screws (B)
Attach the bottom panel, and then secure it at each of the eight screw locations using the included screws (B).
Before attaching the bottom panel, make sure that all wiring harnesses are connected.
Screw (B)
3. Attaching the left and right side panels with the included screws (A)
Attach the side panels, and then secure it at the four screw locations using the included screws (A).
10
Screw (A)