AND UA-1020-W Manual De Instrucciones página 8

Symbols
Appears during measurement when
the cuff is applied loosely.
Previous measurements stored in MEMORY.
Average data
FULL BATTERY
The battery power indicator during
measurement.
LOW BATTERY
The battery power is low when it
blinks.
Unstable blood pressure due to
movement during measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during the inflation.
The cuff is not applied correctly.
PUL DISPLAY ERROR
The pulse is not detected correctly.
Blood pressure monitor internal error
Systolic blood pressure in mmHg
SYS
Diastolic blood pressure in mmHg
DIA
Pulse per minute
PUL
Data taken between 4:00 and 9:59
AM
Data taken between 18:00 and 1:59
PM
Pressure settings
Indicates the pressure value
previously set by the user.
Function / Meaning
English 6
Recommended Action
The reading may yield an
incorrect value. Apply the
cuff correctly, and take
another measurement.
Replace all batteries with new
ones when the mark blinks.
Try the measurement again.
Remain still during
measurement.
Fasten the cuff correctly,
and try the measurement
again.
Remove the batteries and
press the START button,
and then install the batteries
again. If the error still
appears, contact the dealer.