AND UA-1020-W Manual De Instrucciones página 18

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
Notes for Accurate Measurement
Sit down in a comfortable position. Place your arm on a table with your
palm facing upward and the cuff at the same level as your heart.
Relax for about five to ten minutes before taking a measurement. If you
are excited or depressed by emotional stress, the measurement will
reflect this stress as a higher (or lower) than normal blood pressure
reading and the pulse reading will usually be faster than normal.
An individual's blood pressure varies constantly, depending on what you
are doing and what you have eaten. What you drink can have a very
strong and rapid effect on your blood pressure.
This device bases its measurements on the heartbeat. If you have a very
weak or irregular heartbeat, the device may have difficulty determining
your blood pressure.
Should the device detect a condition that is abnormal, it will stop the
measurement and display an error symbol. Refer to page 6 for the
description of symbols.
This blood pressure monitor is intended for use by adults. Consult with
your physician before using this device on a child. A child should not use
this device unattended.
The automatic blood pressure monitor's performance may be affected by
excessive temperature or humidity, or altitude.
TriCheck
The TriCheck
and displays the average values of the three measurements.
Selecting the TriCheck
1.
In the pressure setting mode, press
the
SET
TM
TriCheck
setting blinks.
2.
Press the
TM
TriCheck
mode ON or OFF.
ON: TriCheck
OFF: Normal measurement mode (default value)
3.
Press the START or SET button to
turn the device off. After three
minutes of non-operation, the device
will turn off automatically.
TM
mode takes three consecutive measurements automatically
TM
Mode
button
to
enter
setting mode. The current
or
button to turn the
TM
mode
TM
Measurement
In the pressure setting mode,
the
English 16
press
The current setting blinks
or
Change the setting
or
START
loading