Machine Specification - Tyres; Tyre Pressure; Cutting Performance - Jacobsen F305 Manual De Seguridad, Funcionamiento Y Mantenimiento

4 SPECIFICATIONS
4.4 MACHINE SPECIFICATION _____________________________________________
Product
Tyre Size
Standard Tyre 26.5 X 14.00 -12 OTR Ultra Chevron
Frame construction:
Cutting unit drive:
Transmission:
Speeds:
Cutting:
Transport:
Steering:
Ground pressure:
Battery:
4.5

CUTTING PERFORMANCE _____________________________________________

66 cuts per metre at 12km/hr with 11 knife reels.
42 cuts per metre at 12km/hr with 7 knife reels.
F407
4.32 hectares/hr.at 12km/hr.
F305
3.17 hectares/hr.at 12km/hr.
10% allowance is included for normal overlaps and turning at the end of each cut.
en-20

TYRE PRESSURE

Front Wheel
Tyre Type Tyre Pressure
0.83- 1.03bar
Heavy duty fabricated steel chassis with box section frame rails.
Fixed displacement hydraulic motors connected to the cutting unit.
On Demand 4-wheel drive. Direct coupled variable displacement pump to direct
coupled 398 cc for POCLAIN Front Motors,
338 cc rear wheel motors.
0 - 12 km/h Forward
0 - 6.4 km/h Reverse
0 - 14 km/h Forward
0 - 6.4 km/h Reverse
Hydrostatic power steering, with an adjustable tilt on the steering wheel.
F407 173Kpa / 1.77Kg/cm² / 25PSI
(Figure quoted as guide only and will depend on configuration of machine. Value
measured with 7knife units and brush kits, Weight transfer disengaged. tyre
pressures @18PSI.)
Brakes: Hydrostatic braking with hydraulic parking brakes on front wheels.
80 Ah – 680 CCA (Supplied with
Tyre Size
20 x 10.00-8
(12-15psi)
uasa L26-80)
Y
Rear Wheel
Tyre Type Tyre Pressure
0.83 - 1.24 bar
OTR Grassmaster
(12-18psi)