Idiomas disponibles
Idiomas disponibles
8 MAINTENANCE AND LUBRICATION
8.6
HYDRAULIC SYSTEM FLUSHING ________________________________________
From factory the machine will be delivered with Greenscare™ biodegradable vegetable oil. should the machine
have had a replacement mineral oil added, before reverting back to vegetable oil it is important to flush the
entire system of old oil before replacing with new.
Terresolve™ EnviroLogic ® BioFlush is a carefully designed fluid which helps to flush and remove petroleum oil
from hydraulic systems. This is done when converting hydraulic systems to the use of biodegradable fluids.
EnviroLogic ® BioFlush will condition the internal hydraulic system to help optimize both overall system
performance and fluid biodegradability.
1.
Run equipment until warm. Drain petroleum hydraulic fluid and replace all hydraulic filters.
2.
Fill system with EnviroLogic ® BioFlush. Run equipment for 5 minutes until fluid is completely circulated.
3.
Drain the BioFlush and replace hydraulic filters.
4.
Fill system with approved Greenscare™ biodegradable ISO VG 46 hydraulic oil.
The hydraulic system is now optimised for fluid biodegradability in the event of leakage.
When changing from vegetable to mineral oil there is no need to flush the system.
8.7
HYDRAULIC TEST PORT _______________________________________________
Hydraulic service test ports are provided to enable oil condition to be checked should any problems with the
hydraulic system are experienced
All tests, unless stated otherwise, must be carried out with the hydraulic oil at normal working temperature.
TEST PORT
A.
Return Manifold Test Port - Located under operators platform on forward bulkhead.
NOTE: Any hydraulic related issues contact your Jacobsen dealer for a full fault diagnosis.
en-70
A
