6.3.2
WARNING / SERVICE SCREEN_________________________________________
After the Start-up Screen the Warning Screen is shown, the screen is visible for four seconds. If the machine is
within 5 hours of the next service, a warning is shown. An operator input is needed to continue to the Home
Screen. If there is no input needed, the main screen will become visible. If a fault condition has occurred during
the previous start, a pop up screen will become visible over the top of the warning screen. The operator must
confirm the fault before they can move to the Home Screen.
If incorrectly used this machine can cause
severe injury. Those who use and maintain
this machine should be trained in its proper
use, warned of its dangers and should
read the entire operators manual before
attempting to set up, operate,
ICONS
9
1
10
2
3
11
4
12
5
13
6
14
H
O
2
7
15
8
16
WARNING
adjust or service
the machine.
1.
Park Brake Engaged
2.
DPF Inhibit
3.
DPF Regeneration Request
4.
DPF Regeneration Ongoing
5
Cutter Indicator (Flashes if not in off position on start up)
6.
Water In Fuel Warning
7.
Wing Lock
8.
Foot Pedal Warning (Flashes if not in neutral position on start up)
9.
Seat Warning (Flashes if not occupied or disconnected on start up)
10
Fuel Indicator (Below bar graph)
11.
Engine Temperature Indicator (Below bar graph)
12.
Check Engine
13.
Weight Transfer
14
Engine Able To Start
15.
Engine Unable To Start
16.
Backlap Engaged
CONTROLS 6
1234
123.4 Hours
P
®
TM
en-29