Idiomas disponibles
Idiomas disponibles
4 SPECIFICATIONS
4.2 DIMENSIONS & WEIGHTS ________________________________________________
A Width of Cut F305
A Width of Cut F407
B Maximum width Cutting: F305
B Maximum width Cutting: F407
C Maximum width Transport (minimum): F407 / F305
D Maximum height with ISO21299 ROPS Frame up - All
E Total Length Cutting / Transport
F Total Length Cutting with grass-boxes
G Wheel Base - All
H Wheel Track Front- Measured Centre to centre
Wheel Track Front - Measured Outer face to Outer face
J
Wheel Track Rear - Measured Centre to centre
Wheel Track Rear - Measured Outer face to Outer face
Turning Circle Outside Diameter
Weight of Machine, F305 with ROPS. No Fuel, No Units (yokes only)
Weight of Machine, F407 with ROPS. No Fuel, No Units (yokes only)
Ground Clearance (with Roller Brush Kits fitted)
Weight of Fuel 45.4litres (13.5 US Gallons)
Weight of one 7 Knife Cutting Unit (Floating)
Weight of one 11 Knife Cutting Unit (Floating)
4.3
CUTTING UNIT SPECIFICATION_________________________________________
Construction
Reel Length
Number of Knives
Reel Diameter (New)
Minimum Reel Diameter (Before Replacement)
Head Height of Cut
Rear Roll
Height of Cut Adjustment
Transmission
Maximum Reel Speed rpm
en-18
Fairway 7K
Welded pressed steel construction
660 mm
7
165 mm
148 mm
12 mm - 47 mm
75mm Diameter
Threaded screw system front and rear and three-position
course adjustment on rear roll
By direct drive through splined hydraulic motor to splined
295cm
400cm
157.5"
331cm
130.3"
431cm
169.7"
329cm
129.5"
215cm
295cm
320cm
165cm
205cm
240cm
175cm
199cm
740cm
291.3"
1230kg
2712lb
1413kg
3115lb
12cm (7cm)
4" (2.7")
43.5kg
67 kg
69 kg
Fairway 11K
660 mm
11
165 mm
148 mm
reel.
1200 rpm
116"
84.6"
116"
126"
65"
80.7"
94.5"
69"
78.3"
96lb
147lb
151lb
