Idiomas disponibles
Idiomas disponibles
6 CONTROLS
6.3.3 HOME SCREEN _____________________________________________________
The Home Screen will give the operator alternative button functions
when Button 4 has been pressed once
Buttons numbered left to right:
Button 1:DPF Regen Start
Button 2:DPF Regen Inhibit *Note - Refer to section 8.16 Diesel
Particulate filter for full details.
Button 3: Exit
Button 4: When pressed once this will bring you to the Main Menu.
6.3.4 ENGINE START _____________________________________________________
When the Ignition Key is turned to the start position, this screen is shown.
If the Park Brake is applied, the Cutting Unit Switch is in the OFF position,
the Foot Pedal is in the Neutral position, and the operator is in the seat,
the engine will start.
This screen shows the fuel bar graph on the left side. The colour changes
from green to red as the fuel level decreases. The engine temperature
gauge is on the right side. The colour changes from green to red as the
temperature increases.
6.3.5 THE ENGINE WILL NOT START ________________________________________
When the Ignition Key is turned to the start position this screen is shown.
If any of the icons flash:
• The Park Brake is not applied.
• The Cutter Switch is not in the OFF position.
• The Foot Pedal is not in the neutral position.
• The operator is not in the seat.
Note: The engine will not start until all the items in the list are correct.
The red LEDs either side of the display will flash and the key icon in the
centre will appear red.
GENERAL NOTES FOR WARNING SCREENS
The number in the bottom right of the screen indicates the total
number of faults recorded. Press the button below the to confirm the fault.
en-30
02:01
3.4 Hours
®
1234
123.4 Hours
P
1234
123.4 Hours
P
