Idiomas disponibles
Idiomas disponibles
en
Operation
4.2.2
Installing the gas warning system (pole installation)
On delivery, the layout is "transmitter viewing direction to the right, receiver viewing direction to the left". This layout can be
changed. To do this, both the ground connection and transmitter or receiver must be mounted onto the other side of the
mounting plate. In this case, make sure that the screws of the gimbal between mounting plate and receiver or between
mounting plate and transmitter are screwed in downwards from the top (torque: 3,68 ft lb. ±0.73 ft lb/5 Nm ±1 Nm). The
triangular markings on both mounting plate and gimbal must point to each other.
1. Choose a suitable pole mount kit.
2. Mount the component to the pole using the pole mount kit.
12
4 x
4 x
2 x
2 x
05233451.eps
