Husqvarna FS 305 Manual De Usuario página 14

6. Slowly push the product forward and make sure that
the pointer and the cutting blade are aligned with the
marks.
Introduction
WARNING:
safety chapter before you do maintenance
on the product.
For all servicing and repair work on the product, special
training is necessary. We guarantee that professional
repairs and servicing is available. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.
For spare parts, speak to your Husqvarna dealer or
service agent.
To do before the maintenance
• Park the product on a level surface and stop the
engine. Turn the engine ON/OFF switch to the
OFF position to prevent accidental start during
maintenance.
Maintenance
Clean the external surfaces of the product with water. Refer to
page 15 .
Clean the air filter. In dusty environments, clean the air filter more frequently. Refer to
clean and replace the air filter on page 16 .
Do a general inspection. Refer to
Do a check of the engine oil level.
Do a check of the drive belt. If it is necessary, adjust the tension of the drive belt. Refer to
To adjust the tension of the drive belt on page 15 .
Do a check of the machine stop button. Refer to
on page 7 .
Do a check of the blade guards. Refer to
Do a check of the muffler.
Do a check of the cutting blade. Refer to
Lubricate the grease nipples for the cutting depth adjustment. Refer to
product on page 15 .
Do a check of the water flow. If the water flow is not sufficient, do a check of the water
supply holes in the blade guard. Remove unwanted material that causes a blockage to
the water supply holes.
14
Maintenance
Read and understand the
To do a general inspection on page 15 .
To do a check of the machine stop button
To do a check of the blade guard on page 7 .
To clean the product on page 15 .
CAUTION:
move the product from side to side while
the cutting blade rotates.
• Clean the area around the product from oil and dirt.
Remove unwanted objects.
• Put clear signs around the maintenance area to give
a warning to bystanders that maintenance work is in progress.
• Keep fire extinguishers, medical supplies and an
emergency phone near.
Maintenance schedule
For maintenace of the engine and engine parts, refer
to the operator's manual supplied by the engine
manufacturer.
To clean the product on
To lubricate the
Do not turn, rotate or
Daily Weekly
X
To
X
X
X
X
X
X
X
X
X
1919 - 002 - 23.01.2023
X