Safety Devices On The Product - Husqvarna FS 305 Manual De Usuario

• Use an approved protective helmet.
• Use approved hearing protection.
• Use approved respiratory protection.
• Use approved eye protection with side protection.
There is a high risk of eye injury from thrown objects.
• Use protective gloves.
• Use boots with steel toe-cap and non-slip sole.
• Use approved work clothing or equivalent close-
fitting clothing that has long sleeves and long legs.
Fire extinguisher
• Keep a fire extinguisher near during operation.
• Use a powder fire extinguisher or a carbon dioxide
fire extinguisher.

Safety devices on the product

WARNING:
instructions that follow before you use the
product.
• Do not use a product with defective safety devices.
• Do a check of the safety devices regularly. If
the safety devices are defective, speak to your Husqvarna service agent.
• Do not make modifications to safety devices.
Machine stop button
The machine stop button (STOP) stops the engine.
CAUTION:
stop button to stop the product unless there
is an emergency. For correct procedure how
to stop the product during operation, refer to
To stop the product on page 13 .
To do a check of the machine stop button
1. Make sure that the cutting blade is slightly above the
ground.
2. Make sure that the cutting blade and the blade
flange are tightly attached and the blade guard is
correctly installed. Refer to
blade guard on page 7 .
1919 - 002 - 23.01.2023
Read the warning
Do not use the machine
To do a check of the
3. Turn the machine stop button (STOP) clockwise to
make sure that it is disengaged.
4. Start the product.
5. Push the machine stop button (A) and make sure
that the engine stops.
A
6. Turn the machine stop button clockwise (B) to
disengage.
Blade guard
WARNING:
without a blade guard or with a defective
blade guard. Make sure that the blade guard
is installed and attached correctly before you
start the product.
The blade guard prevent parts, of the blade or the
material that is cut, to be thrown at the operator.
To do a check of the blade guard
• Make sure that the blade guard is correctly installed.
• Examine the blade guard for damages, such as
cracks.
• Replace a damaged blade guard.
• Replace the blade guard if it is hit, bent or has other
defects.
Drive belt cover
WARNING:
without a drive belt cover or with a defective
drive belt cover. Make sure that the drive
belt cover is installed and attached correctly
before you start the product.
B
Do not use the product
Do not use the product
7