Tabla de contenido
Idiomas disponibles
Idiomas disponibles
It is recommended to use only genuine
Miele accessories bearing the
"ORIGINAL Miele" logo on the
packaging. Only these will guarantee
the optimum performance of your
vacuum cleaner and the best possible
cleaning results.
Please note that faults and damage
caused by use of accessories which
do not bear the "ORIGINAL Miele"
logo on the packaging are not covered
by the vacuum cleaner warranty.
Purchasing accessories
Original Miele accessories are available
from the Miele web store, Miele Service,
and your Miele dealer.
Original Miele accessories are identified
by the "ORIGINAL Miele" logo on the
packaging.
With 3D4U, Miele also offers free
accessories to download for your 3D
printer (www.miele.ca > Customer
Support > Spare parts & accessories
> 3D4U – 3D printing instructions).
Filter system (Fig. 27)
Fine dust filter (HX FSF-2)
Pre-filter
Dust container
d Dust container flap
Activating the ComfortClean function
(Fig. 28)
Always run the interim cleaning function
for the fine dust filter before emptying
the dust container. You should also run
it whenever the suction power begins to
drop.
This enables the vacuum cleaner to
achieve the very best cleaning
performance again right away.
The fine dust filter is located in the lid
of the dust container. Twist it
counterclockwise by three 180° turns.
Use the recesses to help you.
You will hear an operating noise, which
is a normal part of how the
ComfortClean function works.
Emptying the dust
container (Figs. 29–33)
Empty the dust container at the latest
when the dust has reached the MAX
marking on the dust container.
Turn the lid of the dust container in
the direction of the arrow as far as
the first stop. Use the grey gripping
surfaces to help you do this (Fig. 29).
Lift the dust container upward to
remove it (Fig. 30).
en-CA
61
Tabla de contenido
