Tabla de contenido
Idiomas disponibles
Idiomas disponibles
en-CA
Regulating the suction power
(Fig. 26)
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to
manoeuvre the Electrobrush.
There are 3 power levels to choose from
on the Comfort handle:
Min.
Lowest power level for light
soiling
Eco
Medium power level for
normal soiling
Max.
Highest power level for
heavy soiling
The floor covering detection function is
activated at every power level.
The Electrobrush power output is
automatically set to the optimum level
based on the type of flooring – this can
lead to a change in the operating noise.
Carpet care function
When the vacuum cleaner is not
moving, the Electrobrush's power is
automatically reduced after a few
seconds to protect the floor.
Illuminating the work area
(depending on model)
The Electrobrush on your vacuum
cleaner is equipped with BrilliantLight to
illuminate the work area.
60
Self-standing function for short
pauses in vacuuming
(For safety reasons, this function can
only be used when the PowerUnit is
fitted at the bottom of the vacuum
cleaner)
If you are vacuuming with the
PowerUnit fitted at the bottom of the
vacuum cleaner, you can easily
interrupt operation while the appliance
is switched on.
Swing the vacuum cleaner forwards
until the Electrobrush connector
audibly clicks into place.
The vacuum cleaner stays securely
upright, the Electrobrush switches itself
off and the battery is conserved.
If you then unlock the connector on the
Electrobrush, the Electrobrush will
switch on again.
Maintenance
Risk of injury caused by rotating
roller brush.
You can injure yourself on the
rotating roller brush.
Switch the vacuum cleaner off before
doing any maintenance work. Use
the On/Off switch on the Comfort
handle to do this.
Tabla de contenido
