Tabla de contenido
en
Maintenance
Risk of injury caused by rotating
roller brush.
You can injure yourself on the rotat-
ing roller brush.
Switch the vacuum cleaner off before
doing any maintenance work. Use
the On/Off switch on the Comfort
handle to do this.
We recommend using only genuine
Miele accessories bearing the "ORI-
GINAL Miele" logo on the packaging.
Only these will guarantee the optimum
suction power of your vacuum cleaner
and the best possible cleaning results.
Please note that faults and damage
caused by use of accessories which
do not bear the "ORIGINAL Miele"
logo on the packaging are not covered
by the vacuum cleaner warranty.
Purchasing accessories
Original Miele accessories are available
from the Miele webshop, the Miele Cus-
tomer Service Department and from
your Miele dealer.
Original Miele accessories are identified
by the "ORIGINAL Miele" logo on the
packaging.
82
With 3D4U, Miele also offers free ac-
cessories to download for your 3D
printer (www.miele.com, Service,
3D4U).
Filter system (Fig. 25)
Fine dust filter (HX FSF-2)
Pre-filter
Dust container
d Dust container flap
Activating the ComfortClean function
(Fig. 26)
Always run the interim cleaning function
for the fine dust filter before emptying
the dust container. You should also run
it whenever the suction power begins to
drop.
This enables the vacuum cleaner to
achieve the very best cleaning perform-
ance again straight away.
The fine dust filter is located in the lid
of the dust container. Twist it anti-
clockwise by 3 180° turns. Use the
recesses to help you.
You will hear an operating noise, which
is a normal part of how the Comfort-
Clean function works.
Tabla de contenido
