Starting/Stopping The Cooking Cycle; Recipe Book - Royal Catering RC-611 E Manual De Usuario

During the HOLDING function, the oven automatically switches to SEMI -STATIC mode with the lowest fan
speed ("1"). However, if the temperature in the cooking chamber is higher than the temperature set for
HOLDING, the oven runs with the fans at speed "2" until the set temperature is reached, then it
automatically switches to SEMI-STATIC mode.
The function is interrupted at any time by touching the symbol.
The HOLDING function is used to keep food warm at the end of cooking, for as long as necessary.

2.7.13 STARTING/STOPPING the cooking cycle

After setting the parameters and their desired values for cooking, simply touch the symbol to start the
cycle.
Before activating a cooking cycle with one or more steps, all the values of the set operating parameters can
symbol (nr.12 Fig.2) for a few seconds: the display shows
be cancelled by touching the the
first step ("Phase 01")
OVERVIEW SCREEN relating to with the values of the parameters that still have to
be set.
To interrupt the cooking cycle at any time, touch the symbol.
When a cooking cycle ends (in "manual" mode or in "programmed" mode) an acoustic warning ("beep")
showing
is activated for 15 minutes, and at the same time the OVERVIEW SCREEN flashes on the display,
the parameter values (excluding the TIME parameter) of the finished cooking cycle in green By
.
touching the
symbol or by opening the oven door, the display returns to the OVERVIEW SCREEN
shows all the parameter values set for the finished cooking cycle in white
which .
If during a cooking cycle a "blackout" occurs for less than one minute, when the power supply is restored
the oven restarts automatically, and the cooking cycle starts again from the moment it was interrupted.
If, on the other hand, the "blackout" occurs for more than one minute, when the power supply is restored,
the oven does not restart automatically, but the OVERVIEW SCREEN appears on the display, showing in red
the values of the parameters set with the time remaining after the end of cooking. Moreover the "4 digits"
(nr.13 Fig. 2) concerning the DELAYED START, display the error code "E18".

2.8 Recipe book

The manufacturer has included in the oven a recipe book that features recipes (programs)
developed by its chefs. The chosen recipe can also be "customised" before executing it by
modifying the values of the cooking parameters.
The recipes can be found inside the "Factory" recipe book, which can be accessed by touching
the symbol (nr.15 Fig.2): displaying the values of the operating
the OVERVIEW SCREEN appears
parameters of the first stored recipe. you can choose the
By touching the symbols and
number of the desired recipe (see identification tables).
Confirm the selected recipe by tapping on the
by touching the symbol. The oven also includes a second
symbol, and start the cooking cycle
recipe book: the "CHEF" recipe book in which up to 100 new recipes can be stored. To access the
recipe book, simply touch the symbol (nr.16 Fig.2): displaying the
the OVERVIEW SCREEN appears
values of the operating parameters of the recipe to be set and stored in blue After setting and
.
storing the recipes, follow the same operating mode used to execute the recipes in the "Factory"
recipe book.
16