Important - Royal Catering RC-611 E Manual De Usuario

symbol and the "core temperature" value preset at 50°C. Touch the symbols
desired value (nr.17 Fig.2). Confirm the set value by tapping on the
During cooking, the display shows the value of the measured "core" temperature of the food being
cooked.
The display can show for 5 seconds the value set for "core temperature" or the value set for
touching
the symbol or the
The
parameters and CORE TEMPERATURE values can also be changed with the cooking cycle
active.
Warning
The
parameters and CORE TEMPERATURE values
TEMPERATURE parameters.
INSIGHTS:
 COOKING WITH CORE PROBE
There are two parameters to be set to cook with core probe: core temperature and cooking temperature.
The cooking time is no longer a control parameter and so does not appear on the "overview screen".
If the cooking cycle consists of a single step, the oven works until the temperature detected by the core
probe is reached inside the food. If the cooking cycle consists of several steps and core probe cooking is
enabled in one of them, once the temperature detected by the core probe is reached, the oven continues
to work switching to the next step.
If, during a cooking cycle with needle shaped thermal probe (core probe) the probe is not properly
connected, the display shows an error with corresponding sound alarm.

IMPORTANT

The needle shaped thermal probe must be inserted inside the food, in the thickest area, avoiding
contact with any bones.
If a cooking cycle with core probe is enabled, the needle shaped thermal probe must already be
connected to the specific socket on the bottom of the oven; otherwise, the display will show the
corresponding alarm.
With the door closed, the needle shaped thermal probe cable must pass between the door
gasket (bottom area) and the door itself.
 COOKING WITH "ΔT" TEMPERATURE
There are two parameters to be set to cook with "ΔT" temperature: the core temperature and "ΔT"
temperature. The cooking time is no longer a control parameter and so does not appear on the "overview
screen".
The "ΔT" temperature parameter makes it possible to maintain constant, throughout the cooking step,
the difference between the temperature inside the food (temperature detected by the needle shaped
thermal probe) and the temperature inside the cooking chamber (cooking temperature). In this way the
value of the temperature in the cooking chamber becomes the sum of the temperature inside the food
and the set "ΔT" temperature. In practical terms there is a slow increase of the temperature in the
cooking chamber: the food undergoes a prolonged and delicate cooking process.
If the cooking cycle consists of a single step, the oven works until the temperature detected by the core
probe is reached inside the food. If the cooking cycle consists of several steps and cooking with "ΔT"
temperature is enabled in one of them, once the temperature detected by the core probe is reached, the
oven continues to work switching to the next step.
If, during a cooking cycle with "ΔT" temperature and needle shaped thermal probe (core probe) the probe
is not properly connected, the display shows an error with corresponding sound alarm.
symbol respectively.
, once confirmed, exclude the cooking TIME and
and set the different
symbol.
T: by
14