Technical Data - Scheppach HS110 Traduccion Del Manual De Instrucciones Originales

Safety Instructions for Handling Batteries
1. Attention: Risk of explosion with improper replace-
ment of the batteries. Only replace the batteries
with batteries of the same or an equivalent type.
Observe the "Technical data".
2. Batteries must not be charged, reactivated by
other means, taken apart, thrown into fire or short
circuited.
3. Avoid contact with the skin, eyes and mucous
membrane. In case of contact with battery acid,
the affected area must be rinsed immediately with
plenty of clean water. Seek medical advice imme-
diately.
4. If batteries are swallowed or enter the body in any
other way, seek medical advice immediately. Keep
batteries away from children and animals.
5. Remove batteries from the battery compartment if
they are depleted, or if the circular table saw is out
of use for an extended period of time. This avoids
damage that may arise due to batteries leaking.
6. Never expose batteries to extreme conditions by
storing them on radiators or in direct sunlight for
example.
7. Clean the battery and device contacts if neces-
sary before insertion, with a little emery cloth for
example.
8. Ensure correct polarity during insertion.
9. Do not use old and new batteries of different types
together.
Residual Risks
This power tool has been constructed in accord-
ance with the latest technology and the generally
recognised safety regulations. Nevertheless, it is
possible that individual residual risks may occur
during operation.
• Electrical hazard if improper electrical connection
cables are used.
• In addition, concealed residual risks may be present
in spite of all the precautions that have been taken.
• Residual risks can be minimised by observing the
„Safety instructions" and „Use in accordance with
the designated purpose", as well as the operating
instructions.
• Do not put any unnecessary stresses on the ma-
chine: excessive pressure during sawing will quickly
damage the saw blade. This may result in a reduc-
tion in the performance of the machine, as well as a
reduction in the cutting accuracy.
• Avoid switching the machine on by accident: when
inserting the plug into the socket, the power button
must not be pressed.
• Use the tool which is recommended in this manu-
al. This will ensure the optimal performance of your
saw.
• Keep your hands away from the working area when
the machine is in operation.
• Before you carry out any adjustments or servicing
work, turn the device off and remove the mains plug.
7.

Technical data

AC motor
Power
Operating mode
Idle speed
Hard metal saw blade
Number of teeth
Riving knife thickness
Min. workpiece dimensions
W x L x H
Table size
Cutting height max. 90°
Cutting height max. 45°
Height adjustment
Tilting saw blade
Suction connection
Weight approx.
Laser class
Laser wavelength
Laser power
Laser module power supply
* Operating mode S6 40%: Continuous duty with in-
termittent loading (operating time 10 min.). In order
avoid impermissible overheating of the motor, the mo-
tor should be driven for only 40% of the operating time
with the stipulated nominal power and must then con-
tinue to run with no load for the remaining 60% of the
operating time.
www.scheppach.com
230 V~ 50Hz
2000 Watts
S6 40% *
4800 min
-1
ø 254 x ø 30 x 2,8 mm
24
2,5 mm
10 x 50 x 1 mm
546 x 630 mm
87 mm
55 mm
0 - 87 mm
0 - 45°
ø 40 mm
19/21 kg
2
650 nm
≤ 1 mW
2x1,5V; AAA
GB | 39