B2.2 Ip Method (Using The Unit Ip Address) - KaVo eXam 0.805.0333 Manual Del Usuario

Imaging plate unit

B2.2 IP method (using the unit IP address)

B - 4
Key the serial number of the unit into the Scan-
ner serial number fi eld. The serial number of
the unit will appear on the unit display when the
unit is switched on. It can also be found on the
type label on the back of the unit.
Make sure that the Computer network connec-
tion that provides the LAN network connection
is selected.
If your system does not allow the direct connection
method to be used to connect the PC(s), connection
can be done using an IP address
1. Follow steps 1 to 5 from the previous section,
Direct connection method (uses the unit s/n).
2. PC: From the Settings tab select IP based and
then select the Enable changing IP address
box.
B. Installation and setup