Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Imaging plate unit
B - 12
Readout start
Select Automatic if you want the scanner to start
automatically.
The Start after options allow to select when the
scanner will start:
-
after Plate insert: the scanner will automatically
start when it detects and IP in the plate carrier.
-
after Cover removal: after the IP and protective
cover have been inserted into the plate carrier,
the unit will automatically start when the protec-
tive cover is removed.
The Start delay options allow the start delay time to
be selected.
-
Short = approximately 0.2 seconds
-
Medium = approximately 0.4 seconds
-
Long = approximately 0.6 seconds
Select Manual if you want the unit to start reading
an IP only when the Start key is pressed.
B. Installation and setup
Tabla de contenido
