Introduction; Functions And Use Of The Use And Maintenance Manual; Symbolism And Qualification Of Operators; Declaration Of Conformity - CAMPAGNOLA COBRA PRO Manual De Uso Y Mantenimiento

1

INTRODUCTION

1.1

Functions and use of the use and maintenance manual

Before working on the machine, carefully read and understand this Use & Maintenance Manual in order to safe-guard the op-
erator and to avoid damaging the machine. These instructions describe how to operate the product safely, economically and
in compliance with the current safety regulations. Following these instructions helps avoid dangerous situations, reduces re-
pair costs and down-time of the product and extends the life-span of the product itself. This manual must be intact and legible
in its entirety. Every operator involved in using the product or in charge of maintenance must know the location and be able to
read it whenever needed.
1.2

Symbolism and qualification of operators

All man-machine operations herein described must be performed by personnel defined in compliance with the manufacturer's
manual. Each procedure is accompanied by a pictogram which indicates the operator considered most suitable for the tasks to be
performed. The indication to identify the personnel qualifications are given below.
Operators
Personnel who can install, operate, adjust, clean, transport the machine and carry out its routine maintenance.
Mechanical maintainers
Mechanical personnel with specific skills, able to perform installation, extraordinary maintenance and/or repairs indicated
in this manual.
Electric/electronic maintenance technician
Personnel with specific electric/electronic skills capable of performing installation, extraordinary maintenance and/or re-
pairs and of operating the product even when the safety and protective systems are partially or fully disabled. This person
is not qualified to perform mechanical interventions.
AUTHORISED WORKSHOP
These are the centres, indicated by Sales Staff of CAMPAGNOLA S.r.l., authorized to repair the products.
WARNING!
Precautions to be taken in order to safeguard the operators and bystanders in the work area.
IMPORTANT!
Note to be taken in order to avoid problems with the product or to operate in compliance with the current safety
regulations.
1.3

Declaration of conformity

Every machine destined to countries included in the European Union (EU) is supplied with adequate characteristics to the
requirements of the Machinery Directive 2006/42/EC. Its manufacturer's Declaration of conformity is enclosed in the use
and maintenance manual.
1.4

Receiving the product

•
When receiving the product, make sure that:
•
it has not been damaged during transportation;
• the supply matches the order (see "Product description" - chap. "Technical specifications").
• If problems arise please contact the manufacturer's Service Department quoting all details indicated on the name-
plate (refer to "Product Identification" - chap. "Technical specifications").
1.5

Warranty

For the general warranty conditions check the dedicated area in the Campagnola website at: http://www.
campagnola.it/downloads, or send a written request to fax number +39 051752551, or send an e-mail to:
[email protected].
WARNING!
For warranty claims, according to the above mentioned points, it is necessary to enclose the properly filled-in warranty
card and the corresponding purchase proof with date of purchase (invoice or any other document with legal value).
Pag. 24
Use and Maintenance Manual – Original
Instructions Rev.: 00, Date 10/10/2018