Reset Button - Welch Allyn CP Serie Manual Del Usuario

Update Through Software Version 2.5
Removable USB Storage Devices
CP 100, CP 200
You can now send tests to removable USB storage devices. If both an SD memory card
and a USB storage device are connected, files are sent to the SD card. The capacity of an
SD card must be > 64 MB, < 2 GB.
Note
Contact Information for Accessories
CP 100, CP 200
It is now possible to enter contact information that will appear on the accessories
Help page.
To enter or review the contact information, press the Menu key
System Settings > Device Configuration > Contact Information.

Reset Button

CP 100, CP 200
If the electrocardiograph is unresponsive for an extended time, it might be "frozen. "
If this occurs, reset the electrocardiograph by pressing the reset button located on the
right side. To press the reset button, insert a small object, such as small paper clip, into
the hole.
Improved Battery Status Feedback
CP 100, CP 200
Whenever the battery is charging and is not yet fully charged, this icon appears:
For maximum battery performance, as often as possible leave the electrocardiograph
plugged in until you see the "fully charged" icon:
New Auto ECG Report Format
CP 100, CP 200
There is a new Auto ECG report format: 2x6 +1R (2 rows x 6 columns + 1 rhythm lead).
The CP 100 and CP 200 do not support SD card capacities greater than 2 GB
including SDHC and SDXC high capacity SD card formats, or other USB storage
devices that have software applications pre-installed such as SanDisk U3 Smart
technology.
. Choose
Reset button
.
5
.