Welch Allyn CP Serie Manual Del Usuario página 25

Directions for Use
Recording a Normal Auto ECG
For a normal Auto ECG, you enter patient data and do other optional tasks before printing,
as shown in
To Record a Normal Auto ECG
1. Press the Auto ECG key
Do not hold it down, or a stat ECG would begin.
2. If prompted, choose Auto Report 1 or Auto Report 2.
The following screen appears.
Figure 37. "Enter New Patient" Screen
Enter New Patient
Patient ID
Last Name
First Name
Birth Date
Weight
Height
Gender
Search
3. Enter or recall the patient data.
•
•
Note
•
Figure 36 on page 56.
9:17AM Oct 16 05
/ / MM / DD / YYYY
lb.
ft. in.
Schedule Clear
If you are using a bar code scanner, scan the patient's bar code. The patient ID
appears on the screen.
If you want to enter the patient data, fill in the fields.
If you do not enter the patient data, write the patient identification
information on the printed report immediately after the ECG test to
avoid associating the ECG report with the wrong patient.
ECG report Print Copy feature will not be available if no Patient Name or
ID are entered.
If you want to recall saved patient data, go to
page 64.
When finished, press the desired softkey:
Clear deletes the entered data and returns to the Patient ID field.
Done accepts the entered data and goes to the Auto ECG Acquisition
screen. See Figure 38
quickly.
For details about these data fields—
including how to choose which fields
display and print—see
Patient Data Fields Available for Auto
Reports" on page 44.
Done
"Recalling Saved Patient Data"
on page 58.
Chapter 5 Performing ECG Tests
"Reviewing the
57
on