Warranty Term - TRAPP TR 600 Manual De Instrucciones

Metalúrgica TRAPP Ltda. warrants this product
to be free from manufacturing defects for 6
(six) months from the purchase date on the
Invoice.
The legal warranty is included in the warranty
term stated in the previous paragraph, which
is divided as follows:
• The first 3 (three) months – legal
warranty;
• The following 3 (three) months – special
warranty offered by Metalúrgica Trapp
Ltda.
The legal and/or special warranty covers:
• Manufacturing defects such as short circuit
on spiral or between phases, rotor failure,
assembly error, material and respective
labor to fix the problem after Metalúrgica
Trapp Ltda. technicians or accredited
technicians attest the condition.
Note:
• All parts proven to be defective will be
replaced for free. The product, however,
will not the exchanged.
• The purchaser will be responsible for
packaging and transportation expenses
to Trapp nearest Assistance Shop.
• This warranty will only apply if product
invoice is presented.
• This product is subject to technical
specification changes without previous
notice.
The legal/special warranty does not cover:
• Defects caused by improper use such as
lack of lubrication (lack of oil), addition of
mixtures to gasoline or oil, excess of oil in
crankcase, extension cord and voltage out
of specification, overload, loss of parts,
lack of phase, broken capacitors, bearings,
shaft, motor adjustment, cleaning of feed
system, broken or dented parts due to

Warranty Term

careless transportation, storage, coupling
or motor energization, product operation
failure due to lack of electric power or
due to problems and/or insufficient
power supply, preventive maintenance
such as motor and actuation device
adjustment.
• Parts such as spark plugs, lubricants,
joints in general, broken or bent
crankshaft, filters, retainers, acceleration
springs.
• Damages due to accidents, improver use,
negligence, ignorance or noncompliance
with the instructions in the Instructions
Manual. Also, the warranty does not
apply if there are signs of product having
been adjusted or fixed by people not
authorized by Metalúrgica Trapp Ltda., if
the product has been exposed to
humidity, weather, saline air etc., or if
parts have naturally worn.
Notes:
• Always use original parts and look for
Trapp Authorized Technical Assistance.
• For your convenience, always keep the
Instructions Manual and the Invoice at
hand.
responsibility for eventual damages
caused to the equipment, neither for
accidents that may occur due to use
80
ENGLISH
ATTENTION!
USE
TRAPP ORIGINAL PARTS
and professional services
of TRAPP Technical Authorized
Assistance.
TRAPP does not undertake
of non-original parts.