TRAPP TR 600 Manual De Instrucciones página 74

Turning the Shredder On
When all preparation steps are done, the
machine will be ready for use.
Tractor discharge power must
be 540 rpm.
Feeding and Shredding System
Before starting to work, make sure the
machine has reached maximum speed.
After properly directing the output
✔
device, open the funnel cover.
Select the material to be shredded; do
✔
not exceed maximum cutting length
of ø10 cm.
Small branches can be shredded if
✔
placed facing entry.
Do not push small branches with your
✔
hands. Use long pieces of wood to do
it. If necessary, use an adequate device
to push the material.
Operation Instructions
72
ENGLISH
Before inserting the material to be
✔
shredded into funnel, remove different
parts of wood not to damage blades.
Output Device Adjustment
The direction of the output device jet can
be adjusted and turned 360°. The direction
of the jet is adjusted with lever (A); the
output position with arm (B). To move it,
loosen screw (C).
Ground Transportation
When transporting the machine by
✔
road, follow the traffic code in force.
Storage
If your shredder has not been used for a
long period of time:
1 - Wash it with a damp cloth and mild
detergent. Dry with a clean and dry
cloth.
A
B
C