TRAPP TR 600 Manual De Instrucciones página 58

3- Personal Safety.
Most accidents occur while the
✔
operator is using the machine or
during maintenance, and are caused
by lack of attention with basic safety
precautions. It is, therefore,
important to be aware of the
potential risks of an action, paying
attention to their effects.
Take precautions against accidental
✔
running. Make sure the switch is set
to "off" before plugging the
equipment in. Failure to do so may
cause a major accident.
Beware with what is going on and use
✔
common sense when operating the
equipment. Do not use it when you are
tired, distracted or under the influence
of drugs, alcohol or medicine. A slight
distraction may result in a severe injury.
Wear protection equipment. Always
✔
wear goggles. Wearing protection
equipment like gloves, shoes, and ear
plugs increases your protection and
reduces the risk of an accident.
Wear proper clothes. Wear neither
✔
loose clothes nor jewelry as they can
accidentally get caught by the movable
parts. If you have long hair, tie it safely.
Remove all objects before turning on
✔
the equipment. A tool or any other
object stuck in the movable parts of the
equipment may result in an injury.
4 - Use and Care.
Do not use the equipment if the switch
✔
does not turn on/off. The equipment
can not be controlled if the on/off
switch is damaged. A defective switch
shall be immediately repaired.
Switch off the circuit breaker, remove
✔
the fuses or unplug the equipment
before servicing, replacing the cutting
blades and accessories. These safety
preventive measures reduce the risk of
accidental operation of the equipment.
Do not overuse the equipment. Use it
✔
in the right way and for the purposes
described in this manual for better
performance and safety while working.
Do not allow people that are not
✔
familiarized with the equipment to use
it. The equipment may become
dangerous in the hands of people not
familiar with its operation.
Preserve your equipment. Frequently
✔
check if the movable parts are secured,
if any component is damaged or check
for any other condition that may affect
optimum operation. Shall any problem
arise, fix it before using the equipment.
Many accidents are caused by lack of
proper maintenance.
Keep the cutting blade sharp and clean.
✔
Use the equipment and accessories
✔
according to the instructions in this
manual. Take in consideration the
working conditions and the service to be
done. Using the equipment for operations
other than those in this manual may
result in dangerous situations and risk of
accident.
Do not shred stones, glass, metals,
✔
plastic, packages of chemical products
(perfumes, cleaning products, paint,
etc.) or other materials that may damage
the shredder.
The cutting blade keeps moving
after the equipment is switched
off. Be aware of that when
servicing.
56
ENGLISH
Attention!