TRAPP TR 600 Manual De Instrucciones página 73

When using the equipment:
Check if rotation direction is correct.
✔
Only shred wood and plant waste of
✔
proper dimensions.
Wear proper clothes and safety
✔
equipment.
Make sure there is enough fuel in the
✔
tractor to prevent an unplanned stop.
Only use shredder in safe conditions,
✔
well lit and ventilated areas.
Push small material with long pieces of
✔
wood.
Small wood fragments must be slowly
✔
pushed, longitudinally, to prevent chips
from being thrown against the operator.
Check whether machine is properly
✔
connected.
The equipment must rest safely on the
✔
ground.
To avoid overloading TDP, shredder
✔
must be parallel to the ground.
Blades must be sharp.
✔
Check whether output device is properly
✔
assembled and in the right direction.
Properly secure and adjust counter-
✔
blade.
Check for the presence of tools or
✔
objects on motor or equipment, mainly
inside the funnel.
Operation Instructions
71
ENGLISH
Check for people, pets or objects near
✔
the area.
Attention!
Unless when maintaining, do
✔
not remove safety devices,
protection covers or collectors.
When removal is necessary,
stop the motor, handle carefully
and reassemble properly before
using the equipment again.
To prevent major accidents, do
✔
not put your hand inside the
funnel.
Note:
If equipment is properly prepared,
✔
start the motor. Wait for it to
reach maximum revolution and
start working.
Keep diesel or gasoline motors
✔
running for some minutes to reach
normal working temperature.
Do neither start nor leave a diesel
✔
or gasoline motor running in
closed environments, with no
ventilation. Exhaust gas contains
carbon monoxide, an odorless and
lethal gas.