TRAPP TR 600 Manual De Instrucciones página 65

The equipment must be installed in an
✔
open, well-ventilated environment on
solid, flat ground.
Keep children and spectators away.
✔
People, especially children, must remain
at a safe distance from the working area
– 30m – when the equipment is being
used. The operator/user is responsible
for accidents that may occur.
Do not allow people to touch the
✔
machine while being used or
transported.
Do not lubricate, clean or adjust
✔
movable components while they are
moving or when the machine is being
lifted.
When maintaining or adjusting the
✔
equipment, do not use your hands in
operations that can be done with
specific tools.
Do neither use bad tools nor use them
✔
inadequately (e.g. pliers instead of
wrenches, etc.).
Before servicing hydraulic lines under
✔
pressure, switch their components off,
making sure the line is not under
pressure and the liquid in not hot.
After maintenance or repair, make sure
✔
tools, cloths or other materials/objects
were not left inside gaps or guides with
movable parts.
When using the equipment, only one
✔
person must give instructions and
signalize the direction of loads.
Maximum diameter of branches to be
✔
fed must be 10 cm.
Remove weird objects such as metal,
✔
glass or stones before turning
machine on.
Just remove protection lid when
✔
machine comes to a stop.
Turn shredder on and wait for maximum
✔
revolution to be reached to insert
materials.
Trapp is not responsible for damages
✔
caused due to failure to observe the
instructions in this manual.
Tractor Discharge Power
Indications - TR 600T
Only operate shredder if properly
✔
connected to the three connecting
points of tractor.
The shredder can be transported by a
✔
tractor. However, if the equipment has
to be coupled in the place itself, it must
be flat, compacted soil, of enough
dimensions to operate it.
Never lift the machine when tractor
✔
discharge power is on.
63
ENGLISH