TRAPP TR 600 Manual De Instrucciones página 80

To change motor oil
Establish the temperature range foreseen
before next change of oil. All oils must
correspond to API SG-SL classification.
1 - Equipment must be on a flat and level
surface.
2 - Hot oil will drain better.
3 - Collect used oil in proper container.
4 - Carefully unscrew oil container to
prevent accidents such as burns.
Attention!
If motor is hot when changing oil,
be careful to remove oil container.
Hot oil is released with more
pressure, and may cause burns.
5 - When oil has been fully drained, screw
back oil container.
6 - Remove cover (1) and fill up with oil.
Replace cover.
7 - Check the level of oil with indicating
rod (2). For better reading, firmly hold
cover on tube before removing the rod.
Keep oil at rod "Full" level.
Note:
Frequently check level of motor
✔
oil to prevent damage due to lack
of oil.
78
ENGLISH
1
2