Hazard And Warning Information; Authorised Individuals; Preparations Prior To Starting; Maintenance / Repair - Renfert Duomix Instrucciones Para El Servicio

B. Hazard and Warning
Information
Only intended for indoor use. The unit is
only designed for dry applications and may
not be operated or stored outdoors or un-
der wet conditions.
The unit may only be operated with a power
cord equipped with a plug appropriate to
the local power supply.
Before commissioning, compare the in-
formation on the nameplate with den the
specifications of your local mains power
supply.
Regularly inspect connecting lines and ho-
ses (e.g., the power cord) for damage (e.g.,
kinks, cracks, porosity) or signs of aging.
Units exhibiting damaged connecting lines,
hoses, or other defects must be taken out
of service immediately.
Always unplug the unit from the wall outlet
before beginning any work on the unit's
electrical components.
Do not allow the unit to be operated without
supervision.
Note any hazard or warning information
provided by the material manufacturer.
Do not operate in an explosion-prone area.
C. Authorised Individuals
This product may not be used by minors under the
age of 14.
Only properly trained individuals may operate and
service the unit.
Any repairs not specifically described in these opera- ting instructions may only be performed by a qualified
electrician.
D. Preparations Prior to
Starting
Before operating the unit, make sure the
voltage information on the nameplate corresponds to your local power supply.
E. Maintenance / Repair
Repairs may only be performed by qualified electrici-
ans or authorized dealers.
F. Disposal Information
F.1 Disposing of Consumables
Empty cartridges and tubular bags as well as used
mixing nozzles must be disposed of in accordance
with the manufacturer's instructions.
F.2 Instrument Disposal
The instrument must be disposed of by a specialist
facility. This specialist facility must be informed of any
hazardous residue in the instrument.
F.2.1 D I
ISPOSAL NFORMATION FOR
In order to maintain and protect the environment, to
prevent environmental contamination and to improve
the reutilisation of raw materials (recycling), the Euro-
pean Commission has established guidelines accor-
ding to which manufacturers must take back electrical
and electronic devices in order to forward them to a
regulated disposal or recycling system.
Within the European Union, devices identified with
this symbol may therefore not be disposed of with
unsorted municipal solid waste:
For more information regarding proper disposal and
options for returning used instruments, please go to:
www.renfert.com
F.2.2 I
NFORMATION OF
G
TO ERMAN
Renfert electrical instruments are devices intended
for commercial use.
These instruments may not be disposed of at mu-
nicipal collection points for electrical and electronic
equipment, but instead, are accepted directly by
Renfert.
For more information regarding current return opti-
ons, please go to our Internet pages at:
www.renfert.com
G. Technical Specifications
Mains voltage:
Power consumption:
Mains input fuse:
Dimensions (height x width x length):
Weight (empty):
Noise level:
- 15 -
EU N
ATIONS
P R
ARTICULAR ELEVANCE
C
USTOMERS
230 V, 50 Hz
120 V, 60 Hz
2 x 1.6 A (T) (230 V)
2 x 3.15 A (T) (120 V)
330 x 190 x 380 mm
(13 x 7.5 x 15 inches)
< 70 dB(A)
170 W
7.0 kg
EN