Operating Instructions; Setup And Commissioning; Benchtop Unit; Wall Mounting - Renfert Duomix Instrucciones Para El Servicio

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

Only intended for indoor use.

Before opening the unit, disconnect it from

the mains power supply by unplugging the

power cord from the wall outlet.

1. Setup and

Commissioning

The Duomix can be used as a benchtop unit, alt-

hough it is also suitable for wall mounting.

1.1 Benchtop Unit

Select a stable underlay on which to set the unit up.

1.2 Wall Mounting

With the aid of the wall mounting kit (refer to the

accessories), the Duomix can be securely mounted

on a wall.

The mounting instructions are included in the moun-

ting kit.

1.3 Setup Recommendations

Operate the unit at room temperature

18 - 24ºC [64 – 75.2ºF].

When setting up the unit, please note the following:

• Do not place the unit under a heat source.

• Do not place the unit in front of open windows.

• Do not set the unit up where it will be subjected to

direct sunlight.

• Do not subject the unit to high humidity.

1.4 Connection and Starting

Before connecting the unit to the wall out-

let, make sure the voltage information on

the nameplate corresponds to your local

power supply.

• Connect the provided power cord to the mains con-

nection socket (Figure 1).

• Plug the power cord into the wall outlet.

• Switch the unit on at the main power switch (A, Fi-

gure 2).