Care Instructions; Spare Parts - Renfert lay:art Instrucciones Para El Servicio

At an angle of 115° there is a lid locking
position, which will hold the lid open in a
stable position.
Caution:
If this position is overstretched, the
hinges could become damaged.
EN
3. Labelling foil
The non-permanent marker pen
pro-vided (7) can be used to write on
the labelling foil (4). The foil can be
removed from the lid in order to ex-
change or inscribe the label.
Use the non-reflective side of the foil
to write on. When replacing the foil,
clip behind the 4 mounting points
which can be found on the lid. Firstly,
bend the retaining flaps towards the
matt surface (a).

4. Care instructions

In order to maintain the consistent quality of the mixing palette, it is essential to clean on
a regular basis.
Clean under running water or carefully with a steam cleaner. The case can be cleaned
using conventional detergents and then rinsed thoroughly under running water.
Do not clean using sharp edged, abrasive or solvent based materials. Please only
use soft brushes or cleaning cloths.
When using Tricolor stains it may happen that vaporized stains fluid etches the
plastic lid.
Do not clean the plastic lid with monomers or with liquids containing solvents!

5. Spare parts

1047 0100
9 1045 9991
9 0003 0024
9 0003 0038
6. REACH
Information on REACH and SVHC is available on our website www.renfert.com, in the
Support area.
EN
Labelling foil color, 3 pcs.
Housing lay:art small
Rest plugs low lay:art, 4 pcs.
Case feet, 4 pcs.
a
4
- 2 -
115°
Fig. 3
Fig. 4
Subject to alteration