Hygiene Treatment - Weinmann JOYCE vented Descripción Del Equipo E Instrucciones De Uso

4. Press the elbow through and out of the
retaining ring and pull the rotating sleeve
off the elbow.
5. Detach the coarse adjustment
component from the mask frame.
6. Detach the fine adjustment component
from the coarse adjustment component.
Then detach the forehead cushion from
the fine adjustment component.
Reassembling the mask (Fig. A - D)
1. Attach the forehead cushion to the fine
adjustment component. Then attach the
fine adjustment component to the coarse
adjustment component.
2. Attach the coarse adjustment component
to the mask frame.
3. Push the rotating sleeve onto the elbow
until you hear it click into place.
4. Press the elbow into the retaining ring
until you hear it click into place.
5. Attach the retaining ring and elbow onto
the mask frame. Turn the retaining ring
clockwise until you hear it click into
place.
6. Push the cap onto the pressure
measurement ports.
7. Attach the mask cushion to the mask
frame.
8. Fasten the headgear to the mask with the
clips.

4 Hygiene treatment

4.1 Schedule
Daily
Clean the mask in warm water to remove all
residues. You can disassemble the mask for
cleaning. Use a mild cleaning agent (e.g.
dishwasher detergent). After cleaning, rinse
all parts carefully with clean water.
Caution!
• For patients with a weakened immune
system or a special medical history, daily
disinfecting or sterilization of the mask
components may be necessary. In this case,
please consult your doctor.
• Please take great care when cleaning and
disinfecting the contact surfaces between
the mask frame and the retaining ring.
Residues on these surfaces can reduce the
success of the therapy and the functioning
of the integrated exhaled air system (ven-
ted variants).
Weekly
Disassemble the mask and subject the parts
of the mask to a hygiene treatment (see
"4.2. Cleaning, disinfection, sterilisation" on
page 16).
Hygiene treatment
15