Display Mode - Vogel KFG Serie Instrucciones Para El Manejo

5. Display mode

The display mode can be recognized by the lighted
LED displays. The LEDs are not flashing!
This mode serves for the checkback of current
settings and operating parameters.
Always start the display mode by briefly
pressing one of the two keys
Step Key
1
Press shortly
2
.
3
4
5
6
7
Page 26
Next Chapter
Operating Instructions KFG, KFGS
Display
Current operating state is displayed
Example: Timer operation pause
Remaining time for pause of current lubrication
cycle is displayed
Example: 2.6 h
Preset total time of pause is displayed
Example: 1 h (setting by factory)
Pump operation time is displayed
Example: Timer operation
Example: System is in the pause mode,
current tCO display not possible
Preset value is displayed
Example: 4 min (setting by factory)
System monitoring is displayed
5