Vogel KFG Serie Instrucciones Para El Manejo página 70

display
Monitoring PS and CS monitoring function
OFF is switched off
Cycle Switch Monitoring of cycle
switch is activated
Fault: Low Level Minimum filling level
in storage vessel is reached
Fault: Cycle No signal of cycle switch during
Switch pump operating period
Operation The values displayed in the following are the operating hours
Hour Meter of the control device.
Fault The values displayed in the following are the fault hours which is
Hour Meter the time while the vehicle or machine has been operated in
the FAULT mode.
Block Operation Signal from cycle switch not available. As opposed to normal operation,
the control device is still in the monitoring process. If the fault continues
over 3 pump periods, a fault message will be displayed.
meaning
•
No system monitoring
•
During the CONTACT pump
operating period, the cycle
switch is monitored for pulse
generation.
•
The control device is in the
FAULT mode.
•
The process of functions has
been stopped.
•
The control device is in the
FAULT mode.
•
The process of functions has
been stopped.
Page 22
Contents Chapter
4
Operating Instructions KFG, KFGS