Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Raking
1- Place the machine in the operating position, as explained in the instructions in this manual.
2- Place all the springs in the "spreading" position (fig.23), in both rotors.
NOTE:
Changing the position of the springs is done manually, and does not require the use of any tool. Just
pull the pin and spring and move it to be indicated position in the following figure.
3- WHEEL HEIGHT: Generally the wheel is in
the upper hole (fig.24).
In demanding conditions (example: long hay),
adjust it to other holes to see the best results. If
necessary, perform some tests to find the best
placement.
18
SWATH
Instructions Manual
Capítulos
Tabla de contenido
