System Name; Upgrading Firmware - Lorex L23WD800 Serie Manual Del Usuario

Using the System Menu
• The System Info window opens.
Figure 13.2 System Information window.
• S/W Version: The firmware version on the
system.
• H/W Version: The hardware version of the
system.
• Video Signal Type: NTSC or PAL,
depending on your region.
• Disk Capacity: The size (in gigabytes) of the
internal HDD.
• IP Address: The network address of your
system.
• MAC address: The physical address of your
system on the network.
• DDNS Domain Name: Your Lorex DDNS
domain.
Lorex DDNS registration required.
NOTE:
For details, see "Setting Up DDNS Service"
on page 134.
• RTSP Service Port: The port number that
the system uses to connect remotely via the
client software.
• Web Server Port: The port number that the
system uses to connect to connect
remotely via the Internet or web browsers.
3. Click the X on the top-right corner of the
window to exit.

System Name

To change the system name:
1. Double-click SYSTEM NAME to open the
Virtual Keyboard.
2. Enter an alphanumeric name/title for your
system (max. 15 characters), click OK to
save your settings. The system name will
62
be the name/ID of the system on your
network.
Figure 13.3 Edit the system name.

Upgrading Firmware

Firmware updates may be released
periodically to enhance system performance
and add extra features.
Figure 13.4 Firmware Upgrade window.
Warning: RECORDING STOPS DURING
FIRMWARE UPGRADE.
To upgrade the system firmware:
1. Visit www.lorextechnology.com
the product page for your system.
Download the latest firmware update, if
available.
2. Copy the firmware to a blank USB flash
drive.
3. Connect the USB flash drive to one of the
USB ports on the front panel of the
system.
4. Open the SYSTEM MANAGEMENT menu.
Under F/W UPGRADE, click UPGRADE.
• The Firmware Upgrade window opens.
5. Select the device and click on the firmware
file name and then click UPGRADE.
Once the upgrade is complete, the system will
reset.
and go to